Updates!

Just a quick update! I have long neglected this blog I know! In between making the work, firing the work, photographing the work, entering the work in various shows, and then working my "real job," to keep the proverbial roof over my head, it seems I have precious little time left for much else!  But I just wanted to put up a quick post & let you all know what's been up.

Firstly, I got into another juried show in Colorado- The Contemporary Clay 5th Biennial Exhibit at the Art Center in Grand Junction, which was absolutely fabulous, AND, I actually got to go to the opening, which was great fun!

Secondly, I have been working hard & spending a lot of time learning to fire the Soda Kiln as you can see!

I also wanted to learn some new things, so I took another class which was primarily low fire techniques (in contrast to my love of high fire salt/soda firing!)

We learned how to make molds, & slip cast in addition to making bailing wire sculptures & dipping those in low fire slip as well. Here are a few pics~

While it was fun to learn something new, it only reconfirmed my love of handbuilding & coiling techniques, and the atmospheric results of salt/soda firing & my dedication to the ongoing Polar Series.

Below are the Bears that I have completed in the last 6 months since my last post!

These bears are truly where my heart lies in terms of creating. I love the whole process... the building, glazing, firing & the day of kiln opening to see the results.

:)

I am also very pleased & excited to announce the culmination of the past few years of dedication to this project in an upcoming show entitled "Ursus Adaptation" with the amazingly talented local artist Carol Rose Brown here in Santa Fe, NM. The opening/artists reception is this Friday, July 25th from 6:00 to 8:00 p.m. at Wheelhouse Art.

(The Show will run from July 25th through August 24th- Click on either link above for details.)

Come on out if you can~ I'd love to see you there! I think it will be a fabulous event!

:)

On a side note, this will likely be my last post here, so I just wanted to thank everyone who has stopped by or followed my blog over the past 4- 5 years of this creative journey! Thank you all for your comments, kind support, emails, and friendship. Special thanks to those of you who have expressed interest in my ceramic work and who have contacted me and/or purchased work... just at the time when I've needed the incentive keep at it when I've questioned the pursuance of my artistic dreams.

Though I won't be blogging here any longer, I plan on keeping the blog up & archived, so that when I do get a website up & running at some point in the next few months- I'll be back to post the link. In the meantime, feel free to email me anytime... just click on the link "view my complete profile" on the sidebar... the link to my email is listed there under "Contact."

Thanks again for spending some time with me in the blogosphere...

I wish you all every happiness & enjoyment of this wonderful life!!!

xoxo,

Becky

♡♡♡

The Bears, Kiln Magic & The Best News Ever!!!

Though I meant to get these posted in December- time seriously got away from me! It was crazy busy at the end of the semester... getting things fired, photographing work, critiques, moving out of the studio & then driving home to spend time w/ family for the holidays & then right back to work & starting up new classes... whew! A whirlwind of activity, but finally here they are- the 8 salt fired bears from last semester's continuing Polar Series.

(posted from lighter to darker rather than in numerical order of how I built them)

#1 below is one of my faves.

 Polar Bear # 1
H: 14"  W: 11"  D: 21.5"
Ann's Soda Cone 10 Clay Body- Salt Fired to Cone 11

Alternate View

 Polar Bear # 2
H: 15"  W: 17.5" D: 16"
Ann's Soda Cone 10 Clay Body- Salt Fired to Cone 11

Alternate View- my fave angle :)

Polar Bear # 3
H: 15"  W: 13"  D 18 "
Ann's Soda Cone 10 Clay Body- Salt Fired to Cone 11

Alternate View 1

Alternate View 2

Polar Bear # 5
H: 16.5"  W:16" D 15"
Laguna Sculpture Cone 10 Clay Body- Salt Fired to Cone 9 Oxidation

Alternate View 1

Alternate View 2

Alternate View 3

# 6 below quickly outranked #1 as my all time fave when it came out of the kiln. This glaze + this clay body + salt firing, in my humble opinion, produces the most amazing results! Click twice on any image to enlarge to see the effects of this Kiln Magic in greater detail.

:)

Polar Bear # 6
H: 14.5"  W: 16"  D: 21.5"
Death Valley Red Cone 10 Clay Body- Salt Fired to Cone 11

Detail~head/neck

Detail~foot

Polar Bear # 4
H: 16.5"  W: 16"  D: 19"
Laguna Dark Brown Cone 10 Clay Body- Salt Fired to Cone 11

Alternate View

Polar Bear # 7
H: 15"  W: 13.5"  D: 23.5"
Laguna Dark Brown Cone 10 Clay Body- Salt Fired Cone 10

Alternate View

Polar Bear # 8
H: 15.5"  W:13" D: 26"
Death Valley Red Cone 10 Clay Body- Salt fired to Cone 11

glaze detail 1

glaze detail 2

The glaze detail on # 6 above only goes to show you... if you love a glaze enough, it truly will love you back!! 

:)

Below is my studio at the end of the semester... all cleaned up & turned into an impromptu photo studio using natural light, as my apartment is far too dark to photograph in.

And below, the bears out of the studio & in the classroom during critiques.

"The Last Great Migration" (Prototype)

My reflections on this past semester are mostly positive. While I am not crazy about every single piece, I am crazy about at least half of them, which is good!

 (I used the same glaze & firing methods on each piece above, changing only the clay bodies to move in gradation from variations of white/gray to black to symbolize the Polar Bear as a messenger for the environmental challenges we face.)

 I love this glaze, I love hand building these forms & I love salt/soda firing!!! Though I did get a little clay obsessed between the bears & the micaceous pottery... quite frankly, I would have done much, much more if I didn't have to do things like sleep & work! I think the obsession comes in part from not having my own studio... I feel like when I am taking classes, I need to squeeze in as much studio time as I possibly can, in order to maximize my learning & growth in the wild world of ceramics!

:)

On that note, I am super excited about sharing

THE Best News Ever!!!

One of my pieces has been accepted into

The 6th Annual Juried Exhibition

"Beyond the Brickyard"

at the Archie Bray Foundation for the Ceramic Arts in Helena, Montana!

I am totally honored to have my work included in such an amazing exhibit, at such an amazing place, with such an amazing group of ceramic artists.

The show opens next weekend, so if you're in the area... go!

If you cannot make it, the exhibit will also be online Feb 3rd, so be sure to check it out!

:)

First Results of the Spring Semester!

Just got my first results of the semester out of the kiln~ YAY! Though I've been working obsessively in the studio for the past 2 months, it takes awhile to see the results. While I am fine with that, & have developed some level of patience with the process, it has been a struggle to explain this process to my Studio Practice instructor. You see, in order to have the studio space, I must take the "Studio Practice" Class, which is a combo of all artistic disciplines, including drawing, painting, printmaking & sculpture. While some students in my class can work for a few hours & have a "finished piece of artwork," my pieces take 15- 25 hours to build. Then, assuming there is no cracking in the initial drying phase (which, if you recall, I am drying very slowly over 2-3 weeks, in hopes of alleviating the cracking issues I had when going larger last semester) the pieces must be bisqued, which, depending on how full the kilns are, can take another week. My glaze must be mixed, sprayed on meticulously in the spray booth, wadding applied so the piece won't adhere to the shelf... then comes the wait in line to fire the pieces.

Our soda kiln is small, and there are somewhere around 7 or so classes that are putting work in it. I took the photo above to show my Studio Practice instructor the size of the kiln in relation to my work. Due to the size of my pieces in relation to others, and the space they take up in the kiln, my work was bumped back several firings. While I understand this, despite my best efforts to explain the ceramic process to my non-ceramic instructor, it was indicated that excuses were being made as to why the ceramics students did not have finished work to show. Now, knowing me & my ceramic obsession... don't you think I want to see finished work as well?? Of course! But I can appreciate the process, and all the factors involved in ceramics, (especially the firing) that as a student, are beyond my control.

Glazed work, in cue for loading.

Fully loaded kiln. I was lucky enough to get 3 pieces in this firing. You can see how much space they take up! In addition to all the time- consuming factors listed above, it must be noted that in our student clay community, we all pitch in & help out.  That means that  loading & unloading kilns is part of the process... which I think is great, but this takes time as well. There are so many considerations to take into account when working in clay... and I feel that to compare the processes in clay to other artistic processes in the student setting is like comparing apples to oranges. But, if any of us are to have our own studio one day, learning the in's & out's of the entire process is  both beneficial & essential. 

Anyhow, drum roll please... 

my long awaited Finished Work!!

:)

#1 New Mexico Super Sculpt Cone 10 Clay Body; Soda Fired to Cone 11
Satin Mint Modified Glaze
Dimensions~ H: 16.5"  W:16"  L 16"

As you may recall, my goals for this semester were to complete a series of 10 or so bears, testing a variety of different sculptural clay bodies, to see which I liked working with, which held up to the firing in the Soda Kiln without cracking issues, and how my particular glaze worked with these bodies. (Essentially, these are large scale test tiles!) I was thrilled with the results!! Firstly, no cracking!! Yay! Secondly, while the glaze turned out quite a bit differently on these clay bodies as I was sure they would, I was quite excited about the effects on each. 

:)

While no crystallization occurred on this piece, I am still quite in love with this glaze I find the variation of color nothing short of astounding!

(Click to enlarge on any photo to see glaze detail.)

While the goal of some ceramicists is to attain fairly predictable results, I am loving the uncertainty and different effects attained by testing different clay bodies with the same glaze to see how they react to the atmosphere in the soda kiln. I love the light rose colored tones in this one, which occurred on the back & neck of this piece.

Below is piece # 2. Just a touch of crystallization on the nose & different reactions with the clay body create a totally different effect. I like the inquisitive posture on this one.

# 2 Laguna Sculpture Cone 10 Clay Body; Soda Fired to Cone 11
Satin Mint Modified Glaze
Dimensions~ H: 16"  W: 17" L: 17.5"

Another view~

The piece below was actually built last semester. It was the largest one I had done with the Ann's Soda clay body... I was afraid to fire it as my larger pieces w/ that particular clay body had been cracking in the kiln, but I decided to go for it.  While some cracking did occur on this piece, it was fairly minimal. It was too tall to fit on my photo background paper, so please excuse the amateur photography on the finished piece.

Ann's Soda Cone 10 Clay Body; Soda Fired to Cone 11
Satin Mint Modified Glaze
Dimensions~ H: 21" W: 15" L: 17.5 "

Again, I am in glaze-amazement. The effects turned out much more subtle in this piece. the surface is very stone-like, in person it has the feel of smooth walls of granite.

 Above & below~ a few more views. 

I've dubbed this one "The Guardian." He's much taller than the others (close to 2 feet) & has a presence/feel as if he is watching over them.

Above is our glaze room & spray booth. Just before spring break, I got 2 more pieces glazed, so that hopefully I be able to load them up as soon as classes start up again.

I also finished # 7 above, and # 8 below. Having built 6 bears w/ a variety of different clay bodies, I returned to the Ann's Soda on these two.

And lastly, my messy studio just before campus closed for the week~ I'm running out of space!

My reflections on my coursework thus far this semester are positive, despite the ongoing struggles with the Studio Practice class. While I don't feel I am learning much from the actual class, I am learning a lot by working independently in the studio, testing clay bodies & by creating a cohesive body of work.

✫☼✫

Hopefully I'll have more work to post in the upcoming weeks, but in the meantime...

Wishing you all a very Happy Spring Season!!

☺